Skip to content Skip to sidebar Skip to footer

How to repair a hole in drywall Tips Tutorial


Hello brother! Are you tired of staring at that unsightly hole in your drywall? Whether it was caused by an accidental bump or a doorknob, a hole in your drywall can be an eyesore. But don't worry, with a little bit of patience and the right tools, you can easily repair it yourself. In this article, we will guide you through the step-by-step process of repairing a drywall hole.

Materials You Will Need

Before we begin, you will need to gather a few materials. Most of these items can be found at your local hardware store:

  • Drywall patch
  • Drywall joint compound
  • Drywall knife
  • Sanding sponge or sandpaper
  • Paint and paintbrush

Step-by-Step Guide

Step 1: Prepare the Hole

The first step is to prepare the hole for the repair. Use a drywall knife to remove any loose or damaged pieces of drywall around the hole. Next, use sandpaper or a sanding sponge to smooth the edges of the hole.

Step 2: Cut the Drywall Patch

Measure the size of the hole and cut a piece of drywall patch that is slightly larger than the hole. Use a drywall knife to cut the patch to size.

Step 3: Apply Joint Compound

Apply a thin layer of joint compound around the edges of the hole. This will help to hold the patch in place. Then, place the patch over the hole and press it firmly into place.

Step 4: Apply More Joint Compound

Use a drywall knife to apply a thin layer of joint compound over the patch. Smooth it out as much as possible and let it dry completely. This may take a few hours.

Step 5: Sand the Joint Compound

Once the joint compound is dry, use sandpaper or a sanding sponge to smooth out any bumps or ridges. You want the surface to be as smooth as possible.

Step 6: Apply Another Layer of Joint Compound

Apply another thin layer of joint compound over the patched area. This will help to fill in any remaining gaps or imperfections. Let it dry completely.

Step 7: Sand the Joint Compound Again

Once the second layer of joint compound is dry, use sandpaper or a sanding sponge to smooth it out again. The surface should be completely smooth and even.

Step 8: Paint the Wall

The final step is to paint the wall. Use a paintbrush to apply the paint to the patched area. Let it dry completely and then apply a second coat if needed.


Q: How do I know if the hole is too big to repair myself?

A: If the hole is larger than 6 inches in diameter, it may be too big to repair yourself. In this case, you may need to hire a professional.

Q: Can I use spackling paste instead of joint compound?

A: While spackling paste can be used to fill small holes, it is not recommended for larger ones. Joint compound is specifically designed for repairing drywall and will provide a stronger, longer-lasting repair.

Q: How long does it take for the joint compound to dry?

A: The joint compound may take several hours to dry, depending on the humidity and temperature in your home. It is best to let it dry overnight before sanding or applying another layer.

Q: Do I need to prime the patched area before painting?

A: It is recommended to prime the patched area before painting, especially if you are using a different color of paint. This will help the paint to adhere better and prevent any bleeding through.